N2-GROW™ is designed and formulated to penetrate the toughest of soils and drive moisture down deep into the sub-surface, allowing it to be utilized during those times when the upper layers of your soil become dry and unproductive. During this dry period, the co-polymer wetting agent allows the water to be held in suspension to be wicked up into the rooting zone along with the nutrients that have been made readily available by the N2-GROW™ complex of specialty enzymes. Another benefit of N2-GROW™ is the ability to retain Nitrogen in the rooting zone preventing unwanted leaching and runoff!
For general use as a soil penetrant, use 8 ounces N2-GROW™ per acre three to five times per season as needed to allow water to penetrate deep into the soil.
For use in fertilizer retainment, apply 8 ounces N2-GROW™ per acre with your liquid fertilizer.
If water is already sitting on top of soil, apply 8 to 16 ounces N2-GROW™ per acre. N2-GROW™ will open the soil to take in the water and any fertilizer applied with it.
Shake well and mix in enough water to distribute evenly. May be tank mixed with most liquid fertilizers and pesticides. Use in conjunction with a good soil test and soil fertility program. Always conduct a compatibility test prior to mixing any chemicals.
In row with pop-up fertilizer: 4 to 8 fluid ounces per acre
Through pivot with liquid fertilizer as a fertilizer stabilizer: 8 fluid ounces per acre
(Can be used 3 to 5 times per season as needed)
Golf greens and tees: 2 fluid ounces per 1000 square feet
Lawn and Turf: 2 to 4 fluid ounces per 1000 square feet
Prior to application, all spray/mixing and application equipment must be cleaned. Carefully observe all cleaning directions on product label.
To minimize foaming, fill tank 3⁄4 full of water.
Add pesticides and/or fertilizers as directed by label or in the following order:
Fertilizers and micronutrients
Dry flowables and dispersible granules
Add N2-GROW™ and mix with normal agitation.
Continue filling tank maintaining agitation.
For optimum results spray mixtures containing N2-GROW™ should be applied within 12-24 hours after mixing.